Ask a Question




Ask a Question


KRIX Seismix 3 MK7 Subwoofer

Bring low frequency effects to life with this tight yet powerful subwoofer. Experience movies as the director intended.

$1,445.00

For a deep bass experience that will move the earth without costing the earth, the Seismix 3 Mk7 subwoofer is sure to rock your world.

You won’t have to sacrifice musicality for low frequency output with this tuneful speaker that will allow you to truly feel the rumble of bass with supreme clarity.

A front-firing, vented subwoofer, the Seismix 3 Mk7 features a Krix designed 275mm long throw bass driver, developed specifically for high-level low frequency reinforcement. Enhanced geometry within the magnet structure increases linear cone travel by a whopping 30 percent and allows superior driver control, while the built-in high performance class D amplifier delivers increased sound efficiency with lower power consumption.

Not only capable of effortlessly producing seriously deep bass for your home theatre or sound system, the Seismix 3 Mk7 is available in five genuine timber veneer finishes or classic black woodgrain.

For the ultimate sound experience at home, play it through Krix.

Features
Frequency Range
  • 22 Hz–200 Hz in-room response
Amplifier Power
  • 350 Watts RMS
  • 700 Watts maximum instantaneous power
Output
  • 122 dB maximum SPL in-room response
Inputs
  • Stereo line level RCA
  • Wireless audio receiver
Enclosure Type
  • Bass reflex
  • Front vented
Low Frequency Driver
  • Nominal 275 mm (11”) diameter doped paper cone driver
  • 50 mm (2″) voice coil
  • Wound on high powered Kapton former
  • Vented magnet assembly
Power On/Off
  • Signal sensing
  • 15 minute delay before switching to standby after no input signal
Phase Select
  • 0º to 180º continuously variable
  • Relative to input signal
Low Pass Filter
  • 50 Hz–200 Hz
  • Bypass option
Dimensions
  • 450 mm Height
  • 360 mm Width
  • 410 mm Depth
Weight
  • 18 kg each
Specification
Frequency Range
  • 22 Hz–200 Hz in-room response
Amplifier Power
  • 350 Watts RMS
  • 700 Watts maximum instantaneous power
Output
  • 122 dB maximum SPL in-room response
Inputs
  • Stereo line level RCA
  • Wireless audio receiver
Enclosure Type
  • Bass reflex
  • Front vented
Low Frequency Driver
  • Nominal 275 mm (11”) diameter doped paper cone driver
  • 50 mm (2″) voice coil
  • Wound on high powered Kapton former
  • Vented magnet assembly
Power On/Off
  • Signal sensing
  • 15 minute delay before switching to standby after no input signal
Phase Select
  • 0º to 180º continuously variable
  • Relative to input signal
Low Pass Filter
  • 50 Hz–200 Hz
  • Bypass option
Dimensions
  • 450 mm Height
  • 360 mm Width
  • 410 mm Depth
Weight
  • 18 kg each